Crosby S421T Wedge Socket Termination – Wire Rope End Fitting

Description

Crosby S421T Wedge Socket Termination – Wire Rope End Fitting

Crosby S421T Wedge Socket Termination – Wire Rope End Fitting

• Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXI wire rope.
• Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and
temperature requirements. Importantly, these sockets meet other critical performance requirements including
fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• Type Approval certification in accordance with ABS RULES FOR CONDITIONS OF CLASSIFICAION, PART 1
2017 STEEL VESSELS AND ABS GUIDE FOR CERTIFICATION OF LIFTING APPLIANCES 2017 available.
Certificates available when requested at time of order and may include additional charges
• Basket is cast steel and individually magnetic particle inspected.
• Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter
sockets.
• Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out” of the wedge.
• Eliminates the need for an extra piece of rope, and is easily installed.
• The TERMINATORTM wedge eliminates the potential breaking off of the tail due to fatigue.
• The tail, which is secured by the base of the clip and the wedge, is left undeformed.
• Incorporates Crosby’s patented QUIC-CHECK® “Go” and “No-Go” feature cast into the wedge. The proper size
rope is determined when the following criteria are met:
1) The wire rope should pass thru the “Go” hole in the wedge.
2) The wire rope should NOT pass thru the “No-Go” hole in the wedge.
• Utilizes standard Crosby Red-U-Bolt® wire rope clip.
• The 3/8 through 1-1/8 standard S-421 wedge socket can be retrofitted with the new style TERMINATOR wedge.
• Available with Bolt, Nut, and Cotter Pin.
• U.S. patent 5,553,360, Canada patent 2,217,004 and foreign equivalents.
• Meets the performance requirements of EN 13411-6.
• Available with API-2C certification upon request

Hawk Lifting are proud to be one of the leading Authorised Distributors for Crosby

View our full range of Wire Rope Fittings here