Crosby IP10H Vertical Lifting Clamp for Handling Plates with Extra Hard Surfaces

Crosby IP10H Vertical Lifting Clamp for Handling Plates with Extra Hard Surfaces

From £0.00 - Guide Price

Hawk Lifting are proud to be one of the leading Authorised Distributors for Crosby

Downloads

SKU: N/A Category:

Description

About the Crosby IP10H Vertical Lifting Clamp for Handling Plates with Extra Hard Surfaces:

Crosby IP10H For Vertical Lifting, Turning and Transfer of Steel Plates & Constructions with Extra Hard Surfaces

The IP10H vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of steel sheet, plates, or fabrications with extra hard surfaces from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines.

For Vertical Lifting, Turning and Transfer

  • Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request).
  • Wide variety of jaw openings available: 0 to 155mm.
  • Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
  • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.

Available in a variety of styles:

  • IP10 – Standard clamp for materials with a surface hardness to 37Rc (345 HB).
  • IP10J – Larger jaw opening.
    • IP10S – For use with Stainless Steel material.
  • IP10H – For use with materials with a surface hardness to 47Rc (450 HB).
  • Full 180° turning range for material transfer, turning or moving.
  • Lock open, lock closed ability with latch for pretension on material and then release of material.
  • Optional IP-5000 Stinger assembly available (see page 420). Allows for easy connection between the clamp and hoist hook.
  • Minimum WLL of 10% of Maximum WLL.
  • Maintenance replacement kits are available.
  • Manufactured by a ISO 9001 facility.
  • All sizes are RFID EQUIPPED.

Hawk Lifting are proud to be one of the leading Authorised Distributors for Crosby

View our full range of Lifting Clamps here

Additional information

Weight N/A
Model

0.5 IP10H, 1 IP10H, 2 IP10H, 3 IP10H, 4.5 IP10H, 6 IP10H

Reviews

There are no reviews yet.

Be the first to review “Crosby IP10H Vertical Lifting Clamp for Handling Plates with Extra Hard Surfaces”

Title

Go to Top